Thread: Hauppauge HVR-2200 installation problems

i installed tuner , followed procedures here:
http://linuxtv.org/wiki/index.php/ha...wintv-hvr-2200

when trying set tuner in mythtv backend card not being recognised.i getting output demsg | grep saa :

code:

paul@myth:~$ dmesg | grep saa  [ 11.677646] saa7164 driver loaded  [ 11.677684] saa7164 0000:03:00.0: pci int -> gsi 17 (level, low) -> irq 17  [ 11.677687] saa7164[0]: board isn't known (yet) driver.  [ 11.677688] saa7164[0]: try pick 1 of existing card configs via  [ 11.677688] saa7164[0]: card=<n> insmod option. updating latest  [ 11.677689] saa7164[0]: version might well.  [ 11.677691] saa7164[0]: here valid choices card=<n> insmod option:  [ 11.677693] saa7164[0]: card=0 -> unknown  [ 11.677694] saa7164[0]: card=1 -> generic rev2  [ 11.677695] saa7164[0]: card=2 -> generic rev3  [ 11.677697] saa7164[0]: card=3 -> hauppauge wintv-hvr2250  [ 11.677698] saa7164[0]: card=4 -> hauppauge wintv-hvr2200  [ 11.677700] saa7164[0]: card=5 -> hauppauge wintv-hvr2200  [ 11.677701] saa7164[0]: card=6 -> hauppauge wintv-hvr2200  [ 11.677702] saa7164[0]: card=7 -> hauppauge wintv-hvr2250  [ 11.677703] saa7164[0]: card=8 -> hauppauge wintv-hvr2250  [ 11.678297] core saa7164[0]: subsystem: 0070:8940, board: unknown [card=0,autodetected]  [ 11.678301] saa7164[0]/0: found @ 0000:03:00.0, rev: 129, irq: 17, latency: 0, mmio: 0xfb800000  [ 11.678308] saa7164 0000:03:00.0: setting latency timer 64

i followed next instructions:

"this necessitated download of http://www.steventoth.net/linux/hvr2...010-03-10.1.fw , copy /lib/firmware/<current kernel> (this firmware version doesn't generated using instructions further page)."

dmesg | grep saa gave:

code:

paul@myth:~$ dmesg | grep saa  \[ 14.200625] saa7164 driver loaded  [ 14.200660] saa7164 0000:03:00.0: pci int -> gsi 17 (level, low) -> irq 17  [ 14.201242] core saa7164[0]: subsystem: 0070:8940, board: hauppauge wintv-hvr2200 [card=4,insmod option]  [ 14.201246] saa7164[0]/0: found @ 0000:03:00.0, rev: 129, irq: 17, latency: 0, mmio: 0xfb800000  [ 14.201253] saa7164 0000:03:00.0: setting latency timer 64  [ 14.359232] saa7164_downloadfirmware() no first image  [ 14.359243] saa7164_downloadfirmware() waiting firmware upload (nxp7164-2010-03-10.1.fw)  [ 14.788012] saa7164_downloadfirmware() firmware read 4019072 bytes.  [ 14.788014] saa7164_downloadfirmware() firmware loaded.  [ 14.788022] saa7164_downloadfirmware() secbootloader.filesize = 4019072  [ 14.788028] saa7164_downloadfirmware() firmwaresize = 0x1fd6  [ 14.788030] saa7164_downloadfirmware() bslsize = 0x0  [ 14.788031] saa7164_downloadfirmware() reserved = 0x0  [ 14.788032] saa7164_downloadfirmware() version = 0x1661c00  [ 21.635726] saa7164_downloadimage() image downloaded, booting...  [ 21.739620] saa7164_downloadimage() image booted successfully.  [ 23.857542] saa7164_downloadimage() image downloaded, booting...  [ 25.519905] saa7164_downloadimage() image booted successfully.  [ 25.564461] saa7164[0]: hauppauge eeprom: model=89619  [ 25.925131] dvb: registering new adapter (saa7164)  [ 28.555614] dvb: registering new adapter (saa7164)  [ 28.555839] saa7164[0]: registered device video0 [mpeg]  [ 28.786961] saa7164[0]: registered device video1 [mpeg]  [ 28.997134] saa7164[0]: registered device vbi0 [vbi]  [ 28.997156] saa7164[0]: registered device vbi1 [vbi]  paul@myth:~$ \

the card in capture cards list appears analogue card not dvb dtv

should be?

attached images

• screenshot @ 2012-01-12 16_01_53.jpg (47.2 kb, 8 views)
• screenshot @ 2012-01-12 16_02_37.jpg (47.9 kb, 7 views)

hi paulgirarin,
planning buy hauppauge hvr-2200 too, , set mythubuntu. did work?

Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Multimedia Software [ubuntu] Hauppauge HVR-2200 installation problems

Ubuntu