Thread: Intel ICH10 SATA only sees 5 of 8 drives

hi, i've been working tech support guys bought workstation/server through , have reached problem. i'll attach lspci -vv output, gist of problem if set bios show drives ide os sees 5 drives, plus cd-rom. if set ahci , use native bios driver sees same thing though reports controller ahci , uses ahci driver. don't have lspci can boot cd-rom, not hard drives in ahci mode!

ideas?

code:

  spci -vv -s 00:1f.2  00:1f.2 ide interface: intel corporation 82801ji (ich10 family) 4 port sata ide controller #1 (prog-if 8f [master secp seco prip prio])  	subsystem: super micro computer inc device 0100  	control: i/o+ mem+ busmaster+ speccycle- memwinv- vgasnoop- parerr- stepping- serr- fastb2b- disintx-  	status: cap+ 66mhz+ udf- fastb2b+ parerr- devsel=medium >tabort- <tabort- <mabort- >serr- <perr- intx-  	latency: 0  	interrupt: pin b routed irq 19  	region 0: i/o ports @ a000 [size=8]  	region 1: i/o ports @ 9c00 [size=4]  	region 2: i/o ports @ 9880 [size=8]  	region 3: i/o ports @ 9800 [size=4]  	region 4: i/o ports @ 9480 [size=16]  	region 5: i/o ports @ 9400 [size=16]  	capabilities: [70] power management version 3  		flags: pmeclk- dsi- d1- d2- auxcurrent=0ma pme(d0-,d1-,d2-,d3hot-,d3cold-)  		status: d0 nosoftrst+ pme-enable- dsel=0 dscale=0 pme-  	capabilities: [b0] pci advanced features  		afcap: tp+ flr+  		afctrl: flr-  		afstatus: tp-  	kernel driver in use: ata_piix

code:

sudo lspci -vv -s 00:1f.5  00:1f.5 ide interface: intel corporation 82801ji (ich10 family) 2 port sata ide controller #2 (prog-if 85 [master seco prio])  	subsystem: super micro computer inc device 0100  	control: i/o+ mem+ busmaster+ speccycle- memwinv- vgasnoop- parerr- stepping- serr- fastb2b- disintx-  	status: cap+ 66mhz+ udf- fastb2b+ parerr- devsel=medium >tabort- <tabort- <mabort- >serr- <perr- intx-  	latency: 0  	interrupt: pin b routed irq 19  	region 0: i/o ports @ 9000 [size=8]  	region 1: i/o ports @ 8c00 [size=4]  	region 2: i/o ports @ 8880 [size=8]  	region 3: i/o ports @ 8800 [size=4]  	region 4: i/o ports @ 8480 [size=16]  	region 5: i/o ports @ 8400 [size=16]  	capabilities: [70] power management version 3  		flags: pmeclk- dsi- d1- d2- auxcurrent=0ma pme(d0-,d1-,d2-,d3hot-,d3cold-)  		status: d0 nosoftrst+ pme-enable- dsel=0 dscale=0 pme-  	capabilities: [b0] pci advanced features  		afcap: tp+ flr+  		afctrl: flr-  		afstatus: tp-  	kernel driver in use: ata_piix

code:

sudo lspci -vv -s 05:00.0  05:00.0 ide interface: jmicron technology corp. jmb368 ide controller (prog-if 85 [master seco prio])  	subsystem: jmicron technology corp. jmb368 ide controller  	control: i/o+ mem+ busmaster+ speccycle- memwinv- vgasnoop- parerr- stepping- serr- fastb2b- disintx-  	status: cap+ 66mhz- udf- fastb2b- parerr- devsel=fast >tabort- <tabort- <mabort- >serr- <perr- intx-  	latency: 0, cache line size: 256 bytes  	interrupt: pin routed irq 16  	region 0: i/o ports @ d400 [size=8]  	region 1: i/o ports @ dc00 [size=4]  	region 2: i/o ports @ d880 [size=8]  	region 3: i/o ports @ d800 [size=4]  	region 4: i/o ports @ d480 [size=16]  	expansion rom @ fbdf0000 [disabled] [size=64k]  	capabilities: [68] power management version 2  		flags: pmeclk- dsi- d1- d2- auxcurrent=0ma pme(d0-,d1-,d2-,d3hot-,d3cold-)  		status: d0 nosoftrst- pme-enable- dsel=0 dscale=0 pme-  	capabilities: [50] express (v1) legacy endpoint, msi 01  		devcap:	maxpayload 128 bytes, phantfunc 0, latency l0s <64ns, l1 <1us  			exttag- attnbtn- attnind- pwrind- rbe- flreset-  		devctl:	report errors: correctable- non-fatal- fatal- unsupported-  			rlxdord- exttag- phantfunc- auxpwr- nosnoop-  			maxpayload 128 bytes, maxreadreq 512 bytes  		devsta:	correrr- uncorrerr- fatalerr- unsuppreq- auxpwr- transpend-  		lnkcap:	port #1, speed 2.5gt/s, width x1, aspm l0s, latency l0 unlimited, l1 unlimited  			clockpm- surprise- llactrep- bwnot-  		lnkctl:	aspm disabled; rcb 64 bytes disabled- retrain- commclk-  			extsynch- clockpm- autwiddis- bwint- autbwint-  		lnksta:	speed 2.5gt/s, width x1, trerr- train- slotclk+ dlactive- bwmgmt- abwmgmt-  	capabilities: [70] msi: enable- count=1/1 maskable- 64bit-  		address: 00000000  data: 0000  	kernel driver in use: pata_jmicron  	kernel modules: pata_jmicron

linux inferno.cocoanet.us 2.6.38-13-generic #53-ubuntu smp mon nov 28 19:33:45 utc 2011 x86_64 x86_64 x86_64 gnu/linux

attached files

• fdisk-l.out.gz (727 bytes, 2 views)
• lspci-vv.out.gz (6.7 kb, 2 views)

Forum The Ubuntu Forum Community Ubuntu Official Flavours Support Hardware [ubuntu] Intel ICH10 SATA only sees 5 of 8 drives

Ubuntu